English
 |
| Quantity: | |
|---|---|
BWGPM610W(132)
Brightway Solar
The 610W monofacial dual-glass solar panel is designed for commercial photovoltaic installations, industrial rooftops and utility-scale solar projects. Featuring n-type i-TOPCon monocrystalline cell technology, a 132-cell configuration and a dual-glass structure, this high-power PV module provides a practical option for large-scale solar array design.
With a rated maximum power output of 610W and a module efficiency of 22.6% under standard test conditions (STC), the module supports efficient use of available installation space. Its monofacial design generates electricity from the front side, while the dual-glass construction provides glass protection on both the front and rear surfaces.
The module measures 2382 × 1134 × 30 mm and supports photovoltaic systems with a maximum system voltage of 1500V DC. These specifications make it suitable for evaluation in commercial and utility-scale PV projects where electrical compatibility, structural requirements and installation conditions have been assessed.
With a rated maximum power output of 610W under STC, this solar panel supports high-capacity photovoltaic system planning. Its high-power configuration can help project developers optimize module quantities and installation space for commercial and utility-scale solar projects.
The module uses n-type i-TOPCon monocrystalline solar cells. This technology supports efficient photovoltaic conversion and is designed for demanding solar applications where module performance, reliability and long-term energy production are important considerations.
This module combines a monofacial power-generation design with glass on both sides. Unlike bifacial modules, it is designed to generate electricity from the front surface rather than relying on rear-side light absorption. Dual-glass construction describes the module structure, not its power-generation side configuration.
The module uses a 132-cell configuration and a standardized format of 2382 × 1134 × 30 mm. These specifications help project developers evaluate module layout, mounting arrangements and compatibility with existing PV system components.
The module is rated for a maximum system voltage of 1500V DC and a maximum series fuse rating of 35A. These characteristics support integration into compatible high-voltage photovoltaic systems. Final string design must account for inverter limits, open-circuit voltage at the lowest expected temperature, electrical protection and applicable installation codes.
The 610W output, i-TOPCon cell technology and dual-glass construction make this module an option for commercial rooftops and ground-mounted solar projects. Suitability should be assessed against project-specific electrical, mechanical and environmental requirements.
| Parameter | Specification |
|---|---|
| Product Model | BWGPM610W(132) |
| Manufacturer Reference Model | TSM-NEG19R.20 610W |
| Rated Maximum Power (Pmax) | 610 W |
| Maximum Power Voltage (Vmp) | 40.8 V |
| Maximum Power Current (Imp) | 14.96 A |
| Open-Circuit Voltage (Voc) | 49.0 V |
| Short-Circuit Current (Isc) | 15.86 A |
| Module Efficiency (STC) | 22.6% |
| Cell Technology | N-Type i-TOPCon Monocrystalline |
| Number of Cells | 132 |
| Module Type | Monofacial Dual Glass |
| NOCT Rated Power | 466 W |
| NOCT Maximum Power Voltage | 38.3 V |
| NOCT Maximum Power Current | 12.16 A |
| NOCT Open-Circuit Voltage | 46.5 V |
| NOCT Short-Circuit Current | 12.78 A |
| Module Dimensions | 2382 × 1134 × 30 mm |
| Module Weight | 30.0 kg |
| Front Glass | 2.0 mm, AR-Coated Heat-Strengthened Glass |
| Rear Glass | 1.6 mm, Heat-Strengthened Glass |
| Frame | 30 mm Anodized Aluminum Alloy |
| Junction Box Protection | IP68 |
| Maximum System Voltage | 1500 V DC |
| Maximum Series Fuse Rating | 35 A |
| Nominal Operating Cell Temperature (NOCT) | 43 ± 2°C |
| Operating Temperature | -40°C to +70°C |
| Temperature Coefficient of Pmax | -0.29%/°C |
| Temperature Coefficient of Voc | -0.24%/°C |
| Temperature Coefficient of Isc | +0.04%/°C |
| Cable Cross-Section | 4.0 mm² |
| Cable Length | Portrait installation: 200/320 mm; customizable |
| Connector Options | MC4 EVO2 / TS4 Plus / TS4, subject to regional configuration |
| Product Warranty | 12 years, subject to applicable warranty terms |
| Power Guarantee | 30 years, subject to applicable warranty terms |
STC (Standard Test Conditions): irradiance of 1000 W/m², cell temperature of 25°C and air mass AM1.5. NOCT values are based on irradiance of 800 W/m², ambient temperature of 20°C and wind speed of 1 m/s. Confirm the latest regional datasheet and warranty documentation before purchase.
The 610W rated output supports commercial and industrial rooftop PV projects where roof loading, available space, mounting arrangements and electrical compatibility have been assessed.
This high-power module can be considered for ground-mounted solar installations requiring 1500V DC system compatibility. Project developers should evaluate array layout, inverter specifications and site conditions before selecting the module.
The module can be evaluated for distributed commercial PV systems where its rated output, dimensions and electrical characteristics match the system design.
For large procurement projects, buyers should compare module efficiency, temperature coefficients, structural requirements, connector configuration, warranty terms and delivery arrangements.
The module has a rated maximum power output of 610W under standard test conditions (STC).
No. This is a monofacial dual-glass module. It is designed to generate electricity from its front surface. The term dual glass refers to the glass construction on both sides of the module, not bifacial power generation.
The specified module efficiency is 22.6% under STC.
The module measures 2382 × 1134 × 30 mm and weighs approximately 30.0 kg according to the referenced manufacturer specifications.
STC power is measured under standardized laboratory conditions, including 1000 W/m² irradiance and a cell temperature of 25°C. NOCT power represents performance under a different set of reference operating conditions. The specified NOCT rated power for this 610W module is 466W.
The module's maximum system voltage is rated at 1500V DC. The final system design must also consider inverter voltage limits, temperature-adjusted string voltage and applicable electrical requirements.
The referenced manufacturer datasheet lists a 12-year product warranty and a 30-year power guarantee. Buyers should confirm the applicable warranty document and terms for their destination market and supply batch.
Contact Brightway Solar with your destination country, estimated order quantity, application and delivery requirements. The team can confirm product availability, provide technical documentation and prepare a project quotation.
Looking for a 610W monofacial dual-glass solar panel for a commercial or utility-scale PV project?
Contact Brightway Solar to discuss your project requirements, confirm current product availability and request pricing and technical documentation.
Please include your destination country, required quantity, delivery schedule and project-specific technical requirements to help us prepare a suitable offer.
