English
 |
| Quantity: | |
|---|---|
BWGPG590W(144)
Brightway Solar
The 590W bifacial solar panel is designed for commercial photovoltaic installations and utility-scale solar projects. Featuring n-type TOPCon cell technology, 132 half-cut cells and a dual-glass structure, this high-power PV module supports efficient solar array planning and long-term outdoor applications.
With a rated power output of 590W, the module can be considered for ground-mounted solar farms and commercial PV systems. Its bifacial design allows electricity generation from both the front and rear surfaces, with additional energy yield depending on ground reflectivity, mounting height, row spacing, shading and installation conditions.
The module is designed for compatible photovoltaic systems with a maximum system voltage of 1500V DC. Buyers can contact Brightway Solar to confirm product availability, technical documentation, project pricing and delivery arrangements.
With a rated output of 590W under standard test conditions (STC), this solar panel supports high-capacity photovoltaic array design. Its power rating helps project developers estimate module quantities and plan system capacity according to available installation space and energy requirements.
The n-type TOPCon cell design supports efficient photovoltaic conversion for commercial and utility-scale applications. Buyers should evaluate the module's rated efficiency, temperature coefficients and other electrical characteristics using the official technical datasheet when comparing products.
The module uses a 132 half-cut cell configuration. This is an important product specification when comparing module layouts, electrical characteristics and installation requirements. It should not be confused with 144-cell configurations used by other solar panel models.
The bifacial structure allows the module to generate electricity from its rear surface as well as its front surface. Actual rear-side energy gain depends on ground albedo, installation height, row spacing, shading and other site conditions.
The dual-glass design uses glass on both sides of the module. This construction is suitable for consideration in long-term outdoor PV installations. Project developers should verify the glass specifications, module weight and mechanical load ratings before finalizing mounting structures.
The module supports photovoltaic system designs with a maximum system voltage of 1500V DC. Final string configuration must consider open-circuit voltage at the lowest expected temperature, inverter limits, electrical protection and applicable installation codes.
| Parameter | Specification |
|---|---|
| Rated Maximum Power (Pmax) | 590 W |
| Cell Technology | N-Type Monocrystalline TOPCon |
| Cell Configuration | 132 Half-Cut Cells |
| Module Type | Bifacial, Dual Glass |
| Maximum System Voltage | 1500 V DC |
| Open-Circuit Voltage (Voc, STC) | 48.14 V |
| Short-Circuit Current (Isc, STC) | 15.61 A |
| Maximum Overcurrent Protection Rating | 35 A |
| Bifaciality (Pmax / Isc) | 80 ± 5% |
| Manufacturer Reference Model | CHSM66RN(DG)/F-BH-590 |
The listed electrical values are based on available series-level manufacturer documentation. Confirm the latest model-specific datasheet for the complete 590W specifications, including maximum power voltage, maximum power current, efficiency, dimensions, weight, temperature coefficients, connector details and warranty terms.
The 590W rated power and bifacial design make this module an option for ground-mounted solar farms. Project developers should evaluate site conditions, module spacing and rear-side irradiance when estimating energy yield.
This high-power solar panel can be considered for commercial and industrial PV projects where module output, system voltage and installation requirements meet the project's technical specifications.
Ground-mounted systems may benefit from rear-side power generation when ground reflectivity, mounting height and row spacing are suitable. Actual performance depends on site-specific conditions and system design.
For utility-scale projects, buyers should compare module specifications, inverter compatibility, structural requirements, supply availability and warranty terms before selecting a module for procurement.
The module has a rated maximum power output of 590W under standard test conditions (STC).
The specified product configuration uses 132 half-cut cells. Buyers should verify the exact model reference when comparing it with other 590W modules.
A bifacial solar panel can generate electricity from both its front and rear surfaces. The additional energy yield depends on ground reflectivity, mounting conditions, shading and overall system design.
The specified maximum system voltage is 1500V DC. The complete PV system must also comply with inverter voltage limits, temperature-adjusted string voltage and applicable electrical requirements.
Buyers should confirm the complete electrical specifications, module dimensions, weight, connector type, mechanical load ratings, applicable certifications, warranty terms, minimum order quantity and delivery schedule.
Contact Brightway Solar with your destination country, estimated order quantity, project application and delivery requirements. The team can confirm product availability, provide technical documentation and prepare a quotation based on your project needs.
Looking for a 590W bifacial solar panel for a commercial or utility-scale PV project?
Contact Brightway Solar to discuss your project requirements, confirm current product availability and request pricing and technical documentation.
Please include your destination country, required quantity, delivery schedule and any project-specific technical requirements to help us prepare a suitable offer.
